Nissan Spare Key: The Good, The Bad, And The Ugly
Replacement Nissan Key Fob
Nissan smart keys provide an additional layer of protection against theft using radio frequencies and advanced encryption. However, these systems are powered by an internal battery which will eventually degrade and will require replacement.
The replacement of a key fob battery is simple. Boch Nissan's certified technicians and specialists in parts are waiting to assist you.
Battery
The Nissan key fob is a crucial component. It lets you unlock your doors, start your car, and perform other functions. So when it stops working you'll want to know what the problem is. You can fix the problem by simply replacing the battery.
A brand new CR2032 battery can be purchased at a hardware store or discount grocery store at a cheap price. You'll also need a small screwdriver that you can use to pry open the back panel of your key fob. You can use a screwdriver in order to separate the two halves of the majority of models. Once you've opened the key fob, remove the battery and replace it with the new one. Make sure the new battery is aligned correctly.
Depending on your Nissan model, you might have to ensure that the battery is the proper type. The manufacturer of the key fob typically offers this information in their owner's manual or on the back of the fob. Once you've gotten the right battery, plug it into the fob, close the cover closed, and test it to ensure it works. YouTube has a wealth of videos that can help you find the solution to any issue. If you need assistance contact the service center at your Nissan dealer near Farmington Hills.
Programming
Modern Nissan vehicles come with a key fob that provides an array of convenience and features compared to the traditional manual key. However, they are more prone to battery issues and will require to be replaced with time. However, there is an easy fix that is done at home.
The first step is to take off the battery that is in place. To do this, locate an elongated catch on the back of the keyfob and pull it downward. This will release the mechanical key in your key fob, which is used as an emergency starter. This is something you'll be able to have in your possession and return to after the replacement is completed.
After removing the old battery, note its position and how it was mounted. You'll need the flat-head screwdriver to take the battery out. Replace the old battery with the new one. Make sure the upside side is facing downwards. Reassemble the outer case and check it to confirm that everything is functioning properly.
You should now be capable of starting your car by pressing any button on your fob. You can also test the connection by pressing any button in the dashboard of your car. Contact the service center at Boch Nissan South in case you have questions regarding your Nissan vehicle or require assistance.
Locks
The Nissan Intelligent Key can be used to unlock and lock your car and even open the trunk using a simple button click. If it fails to function even after a programming and replacement of the battery, there may be another issue that needs to be addressed. In some cases the damaged device requires the replacement of an element or repairs to the circuit board to re-function. Water, blunt force, or scratches on the board may cause damage.
A professional can look over the Intelligent Key and determine if it is required to be repaired or replaced. In some cases, the problem is fixable with a straightforward, low-cost fix. For nissan juke key replacement may require replacement.
Changing out the battery in your Nissan key fob is a relatively straightforward process that only takes a few minutes. However, this procedure involves touching delicate and sensitive electronic components, so it is recommended to always wear gloves (preferably latex) or other non-latex alternatives. You will also need an screwdriver with a flathead, as well as a new CR2032 3V battery.
Begin by getting into your vehicle, and making sure all the doors are closed. Press the unlock button on your keyfob up to 10 times. Then, insert and remove the key from the ignition after this. Do not turn the key to start the vehicle. The hazard light should flash twice. This indicates that your Nissan is now in the programming mode.
Keyless Entry
If you think the key fob you have is boring, we have information for you that it can do more than just lock and unlock your vehicle. Some modern fobs are able to open your windows or even start your engine when you tap your key over the rear bumper.
As opposed to the old-fashioned key which only has three or two locks, these newer systems are built on RFID technology. The key fob has an embedded microchip with a distinct frequency that communicates with the receiver in your car, allowing you to open the trunk and doors. Most models will recognize you as you enter the car with the key fob and then automatically unlock the door.
Some models allow you to move your keys to the rear of the vehicle to open the trunk. This can be extremely useful in the event that your hands are full of groceries or luggage. The key fob also has a button that will allow you to start your car by pressing it on the steering wheel. This feature can be activated by tapping the brake or clutch button when you press the START/STOP switch.
The fob on your key could be dead if you are having trouble getting in your Nissan to do errands in Troy or to go out for an evening. To solve this issue, flip the fob over and push the small latch that releases it to the back. You've successfully programmed the replacement Nissan fob if both the unlock and lock light flashing.